Multiact-Plus

Disinfectant,Descaling agent,Acidifier and Biofilm Remover

MULTIACT-PLUS PURPOSE

DESLIMING AGENT

ACIDIFIER

BIOFILM REMOVER

DESCALING AGENT

ALGAE REMOVER

REDUCES BIOBURDEN

COMPOSITION

Benzalkonium Chloride	6%
Citric acid	8%
Inert ingredients	Q.S.

WATER, PIPELINES AND COOLING PADS TREATMENT

The disinfectant that is also a descaler.

Removes scale, mineral deposits, junk and slime from water lines and cooling pads.

Ideal for cleaning and descaling nipple waterers.

Exposes biofilms to disinfection by removing

hard water scaling, minerals and alkaline detergent residues.

Phosphate free, citrate, biodegradable

Non-staining and safe

Non-corrosive (not oxidise to acids & chlorine)

Economical dilution – 2.5 to 5% for descaling of water lines

Drinking water acidifier

DOSAGE

Water Acidification &

Sanitation

1 ml / 10 ltrs of water

Disinfections &

Descaling

25 to 50 ml / IV of

water

A.I. Tips

25 to 50 ml / IV of

water Dip

for 30 mins. and rinse

GUIDELINES FOR PIPELINE DISINFECTION AND DESCALING

Calculate the quantity of water required to fill from overhead tank outlet to the end point of pipelines

Empty the over head tank and drain the pipeline completely Close the outlet of overhead tank & end caps of pipeline properly Fill the required quantity of water as calculated above,

in the overhead water tank, plus 10% extra

Add MULTIACT-PLUS @ 25m1 / ltr of water (if descaling regularly) or 50 ml / Itr of water in the overhead tank

Open overhead water tank outlet only

Ensure medicated water is allowed to flow through till pipeline end point

Allow contact time of 3 hours for this medicated water

Fill overhead tank with sanitized water

Open end caps and ensure the pipeline is flushed out with normal sanitized water from overhead tank

Continue flushing for 2-3 minutes

The pipeline is now disinfected / descaled / sanitized for use. Continue with your regular water treatment schedule Preferably, carry this out at night in the absence of light